Kit RNM 2G - Two-step automatic hub motor

Available as front wheel or back wheel motor!

Continuous rating: 250 watt
Max. rating: 400 watt
Rated voltage: 36 V
Transformation ratio: 1. step: 1:8 / 60Nm
                                        2. step: 1:4 / 30Nm
Max. speed: 1. step: 12,5 km/h
                       2. step: 25 km/h
Motor weight: 3.3 kg
Fitting width frontmotor: 100mm
Shifting System: Two-step automatic or manual switchable
LCD-Display with 5 steps

Battery

Battery type: LiFePo4, NCM battery
Nominal voltage: 36 V
Battery capacities: 9Ah (50-70 km); 11Ah (60-80 km), 15Ah (more than 100 km) | according to handling and weight of the driver
Service life: LiFePo4: approx. 1200 full charging cycles
                           NCM: approx.  600 full charging cycles
Charging time: 4-6 hours
Battery weight: about 3 kg

Charger:

Input voltage: 230V, 50 Hz
Charging voltage: 36 V
Input power: 1.5 ampere

LCD-Display:

Controls the power (5 stages)
Starting aid
Displays the power status of the battery
Speed display
Background illumination
Odometer display
Integrated clock

Kit MM 15

Brushless Mid-Mounted Motor

Rated voltage: 36 V
Continuous rating: 250 watt
Max. rating: 400 watt
Max. speed: 90 rpm
Torque: 80 Nm
Motor weight: 3.4 kg
Drive: Chain drive directly on the rear wheel WITHOUT diverting wheels
Temperature: -25°C to 50°C
Water tightness: IP54
Standard: EN 15194-2009, ROHS
Installation: at all bikes with BSA-bottom bracket
Sensors: torque sensor
coaster brake in development

Battery

Battery type: LiFePo4, NCM battery
Nominal voltage: 36 V
Battery capacities: 9Ah (50-70 km); 11Ah (60-80 km), 15Ah (more than 100 km) | according to handling and weight of the driver
Service life: LiFePo4: approx. 1200 full charging cycles
                           NCM: approx.  600 full charging cycles
Charging time: 4-6 hours
Battery weight: about 3 kg

Charger:

Input voltage: 230V, 50 Hz
Charging voltage: 36 V
Input power: 1.5 ampere

LCD-Display:

5 Stages: Off, Eco, Tour, Speed, Turbo
Starting aid
Displays the power status of the battery
Speed display
Background illumination
Odometer display
Integrated clock

Kit MM 13

Brushless Mid-Mounted Motor

Rated voltage: 36 V
Continuous rating: 250 watt
Max. rating: 400 watt
Max. speed: 90 rpm
Torque: approx. 40 Nm
Motor weight: 4.8 kg
Drive: Chain drive directly on the rear wheel WITHOUT diverting wheels
Temperature: -25°C to 50°C
Water tightness: IP54
Standard: EN 15194-2009, ROHS

Battery

Battery type: NCM battery
Nominal voltage: 36 V
Battery capacities: 9Ah (50-70 km); 11Ah (60-80 km)
Service life: approx. 1,000 full charging cycles
Charging time: 4-6 hours
Battery weight: about 3 kg

Charger:

Input voltage: 230V, 50 Hz
Charging voltage: 36 V
Input power: 1.5 ampere

Display:

Controls the power (5 stages)
Starting aid
Displays the power status of the battery
Speed display
Background illumination
Odometer display
Integrated clock
 

Kit SBS 12

Three-Phase Wheel Hub Motor

Continuous rating: 250 watt
Maximum capacity: 400 watt
Highly efficient and powerful
 
Advantages compared with a direct current motor:
Lighter! - weight: only 2.2 kg
Smaller! - diameter: 103 mm
No rubbing contacts (brushless)
Less power consumption
 

LiFePo4 Battery & Rack

Lithium iron phosphate battery pack with 5 Ah / 7.5 Ah / 9 Ah
Service life: approx. 1,500 full charging cycles
Range depending on assistance and battery: approx. 30-60 km
 
Lockable special rack suitable for 20" - 28" bicycles
Control unit is mounted on the side

LCD Display

Controls the power (3 stages)
Displays the charge status of the battery
Illuminated display
Integrated speedometer
Integrated clock
Records travelling distances and times
On/Off switch

LED Display

Controls the power (3 stages)
LED lamp displays the power status of the battery
Bicycle light can be connected in parallel
On/Off switch



Choose from three drive types:

Control by twist grip

The motor performance is controlled by a twist grip like a motorbike or motorcycle.
 

Control by twist grip and pedals

The small, powerful wheel hub motor is controlled by the twist grip on the handlebar to produce speeds of 0-6 km/h. Pedalling will increase the motor performance to 25 km/h.
 

Control by pedals

You determine the motor performance depending on how much you pedal.
 

Schachner GmbH | Telefon: +43(0)7477/429 73 | Fax: +43(0)7477/429 73-13 | Email: office@elektrobikes.com
© 2015 KLEINWIND - all rights reserved